• sales@mingases.com
  • +604-331 0652

Share:


25mm Contact Tip

A 25mm contact tip is a consumable part used in MIG welding. It is a small, copper-tipped piece that screws into the end of the welding torch. The contact tip is responsible for making contact with the welding wire, and it helps to transfer the electricity from the torch to the wire.

25mm contact tips are typically used for welding with thicker wires, such as 1.0mm or 1.2mm. They are also a good choice for welding in high-current applications.

Contact tips should be replaced regularly, as they wear out over time. The frequency of replacement will depend on the type of welding you are doing, but it is a good idea to check the contact tip every few hours of welding.

Here are some of the benefits of using a 25mm contact tip:

  • They can handle thicker wires, which can improve weld quality and productivity.
  • They are well-suited for high-current applications.
  • They are relatively inexpensive and easy to replace.

Here are some of the drawbacks of using a 25mm contact tip:

  • They can be larger and bulkier than smaller contact tips.
  • They may not be as suitable for welding in tight spaces.

Introduction of 25mm Contact Tip


 Inquiry - 25mm Contact Tip