• sales@mingases.com
  • +604-331 0652

Share:


P-50 Plasma Nozzle

The P-50 plasma nozzle is a type of consumable used in plasma cutting torches. It is made of copper and has a small orifice that constricts the plasma arc, creating a high-temperature jet that can cut through metal. The P-50 nozzle is typically used for cutting mild steel, stainless steel, and aluminum.

The P-50 nozzle is available in a variety of sizes, each with a different orifice diameter. The size of the orifice determines the cutting capacity of the nozzle. For example, a nozzle with a 1.0 mm orifice can cut mild steel up to 1/4 inch thick, while a nozzle with a 1.5 mm orifice can cut mild steel up to 3/8 inch thick.

The P-50 nozzle is a consumable item, meaning that it needs to be replaced periodically. The frequency of replacement depends on the amount of use the nozzle receives. In general, a P-50 nozzle should be replaced every 100-200 hours of use.

Here are some of the benefits of using the P-50 plasma nozzle:

  • It can cut through a variety of metals, including mild steel, stainless steel, and aluminum.
  • It produces a high-temperature jet that can cut through metal quickly and efficiently.
  • It is relatively easy to use.

Here are some of the drawbacks of using the P-50 plasma nozzle:

  • It is a consumable item, meaning that it needs to be replaced periodically.
  • It can produce fumes and sparks, so it is important to use it in a well-ventilated area.
  • It can be dangerous if not used properly.

Overall, the P-50 plasma nozzle is a versatile and effective tool for cutting metal. It is easy to use and can produce clean cuts in a variety of metals. However, it is important to use the nozzle in a well-ventilated area and to follow safety precautions when using it.



 Inquiry - P-50 Plasma Nozzle