• sales@mingases.com
  • +604-331 0652


45mm Contact Tip

A 45mm contact tip is a type of welding contact tip that is commonly used in MIG welding. It is typically made of brass or copper-chromium-zirconium alloy, and has a length of 45mm. The contact tip is responsible for transferring the welding current to the wire as it passes through to create the arc. It also helps to guide the wire and prevent it from snagging or breaking.

45mm contact tips are available in a variety of sizes to accommodate different wire diameters. The size of the contact tip is typically measured by the inside diameter of the nozzle. For example, a 45mm contact tip with a 1.2mm nozzle will be able to accommodate a 1.2mm wire.

When choosing a 45mm contact tip, it is important to consider the following factors:

  • The type of welding wire you will be using
  • The welding current you will be using
  • The desired weld quality

It is also important to regularly inspect and replace contact tips as they wear out. Worn contact tips can cause poor weld quality and arc instability.

Here are some of the benefits of using a 45mm contact tip:

  • They are able to handle high welding currents.
  • They are able to produce high-quality welds.
  • They are relatively inexpensive.

Here are some of the limitations of using a 45mm contact tip:

  • They can be damaged easily if not handled properly.
  • They can produce sparks and slag, which can be a safety hazard.

Overall, 45mm contact tips are a versatile and reliable type of welding contact tip that can be used for a variety of applications. They are a good choice for both professional and hobbyist welders.

Introduction of Contact Tip

 Inquiry - 45mm Contact Tip